NEC Univerge SV8100 VM8000 InMail System Manual page 324

Issue 1.0
3 - 38
Default
0 (No - disabled)
47-06-09 Auto Time Stamp
Use this option to enable or disable Auto Time Stamp for the Subscriber
Mailbox. If enabled, after the subscriber listens to a message VM8000
InMail announces the time and date the message was left. Auto Time
Stamp will also announce the message sender (if known).
A subscriber can also enable Auto Time Stamp from his mailbox.
See Auto Time Stamp

See Routing Mailbox

See Voice Mail Overflow

Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
47-06-10 System Administrator (System Admin)
Use this option to designate the Subscriber Mailbox as a System
Administrator. This allows the subscriber to use the SA options after logging
onto their mailbox.
See Routing Mailbox

See System Administrator

See Voice Mail Overflow

Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
47-06-11 Dialing Option
Dialing Option provides additional dialing options for Next Call Routing
Mailbox calls (see Next Call Routing Mailbox below). If enabled, a caller
who accesses the Subscriber Mailbox to leave a message can dial any of
the options in the Next Call Routing Mailbox's Dial Action Table. If disabled,
the caller can only dial 0 (to use the Next Call Routing Mailbox's 0 action).
See Routing Mailbox

See Next Call Routing

See Voice Mail Overflow

Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
for more.
for more.
for more.
for more.
for more.
for more.
for more.
Mailbox.
for more.
VM8000
Programming