Message Count Display - NEC Univerge SV8100 VM8000 InMail System Manual

VM8000
Description
The telephone display provides interactive status updates for the subscriber's
mailbox. When initially logged on to the mailbox, the telephone display shows the
number of new and saved messages. The message count automatically updates as
the subscriber receives new messages and processes older messages.
If an extension Message key is optionally assigned as a Message Waiting key (see
Programming below), the telephone display can show the number of new Voice Mail
messages without the user logging on to their mailbox. If the user has 1 new Voice
Mail message in their mailbox, for example, they see the following display:
Enhanced Message Key Operation
When a keyset has 15-02-26 Multiline Telephone Basic Setup: Message Key
Operation Mode set to 1, the Message key provides one-button access to VM8000
InMail. When the user presses Message, they immediately call their mailbox.
When a keyset has 15-02-26 Multiline Telephone Basic Setup: Message Key
Operation Mode set to 0, the following occurs:
InMail System Guide
If a user has new voice mail messages waiting, pressing Message shows the
number of waiting voice mail messages. Pressing Message a second time calls
voice mail.
If a user has new Message Waiting indications left, pressing Message shows
the extension that left the Message Waiting. Pressing Message a second time
places an Intercom call to the coworker that left the Message Waiting.

Message Count Display

22- and 34-Button Display
Issue 1.0
2 - 163