Fax Detection - NEC Univerge SV8100 VM8000 InMail System Manual

VM8000
Description
The Automated Attendant can detect incoming fax calls and transfer them to a fax
machine. With Fax Detection enabled, after the Automated Attendant answers a call it
listens for incoming fax CNG tone. If it detects the tone, it does an unscreened
transfer of the call to the specified company fax machine. The incoming fax then
prints out on the company fax machine. If you disable Fax Detection, the Automated
Attendant does not detect and route incoming fax calls.
Related Features
None
Programming
1.
2.
Operation
Not applicable
InMail System Guide
Enable Fax Detection for the active Call Routing Mailbox.
47-08-04

Fax Detection

Enter 1 (Yes) to enable Fax Detection for the Call Routing Mailbox.
By default, this option is 0 (No).

Specify the extension to which VM8000 InMail should send a fax call when the
Automated Attendant detects fax CNG tone.
47-08-05 Fax Extension (Fax Extension)
Normally, this is the extension number of the analog port to which the fax
machine is connected.
By default, this option is undefined (entered by pressing Hold).

Issue 1.0
Fax Detection
2 - 93