NEC Univerge SV8100 VM8000 InMail System Manual page 361

VM8000
UND Action - Undefined Routing (0) (UND)
Use this key action if you want a key to have no routing (no operation). When an
Automated Attendant caller presses an undefined key, they hear, "That is an invalid
entry." The caller can then dial another option.
Digits (0~9, #, and *)
Use Dial Action Table digits to route an Automated Attendant call to a specific location
(such as an extension). For example, to set up a TRF Action to route to extension
305, for digit 3 enter TRF for the Action and 305 for the corresponding Number.
Caller Dialed Digits (X) [Entered by pressing LK2]
Use the X option to route an Automated Attendant call based on digits the caller dials.
Each X entry represents one caller-dialed digit. For example, to set up a TRF Action
to route to any caller dialed extension in the 101~399 range, for digit 3 enter TRF for
the Action and XXX for the corresponding Number.
InMail System Guide
Number Option
Not applicable
Additional Information
See Undefined Routing on page 2-243

See Dial Action Table on page 2-63
Options
0~9, #, and * (8 digits max.)
Default
See Dial Action Table Default Settings on page

See Dial Action Table on page 2-63
Options
X (Entered by pressing LK2)
Default
See Dial Action Table Default Settings on page

for more information.
for more information.
for more information.
Issue 1.0
3-70.
3-70.
3 - 75