Led Indication; Figure 1-4 Checking Led1; Section 1 Install The Vm8000 Inmail Blade - NEC Univerge SV8100 VM8000 InMail System Manual

Issue 1.0
LED I
S 3
ECTION
1.
2.
S
S 4
TART
ECTION
When you install the VM8000 InMail blade and turn on the system, VM8000 InMail
has the following default programming:
1 - 4
NDICATION
Power up the system.
Remove the grounded wrist strap.
Mount the PZ-VM21 onto CD-CP00-US.
Install the CD-CP00-US in the SV8100 chassis.
Turn the chassis power switch to On.
Check the VM8000 InMail LED. See
Once the system powers up, check LED1 on the InMail daughter board.
LED1 is viewable on the front panel of the CD-CP00-US.
LED1 will blink quickly only when the InMail CF is being accessed.

- (D ) VM8000 I
UP EFAULT
Subscriber Mailboxes are enabled for extensions 101-108. The mailbox
numbers are the same as the extension numbers.
The Automated Attendant does not answer outside calls.
The VM8000 InMail does not answer internal calls.
Figure 1-4 Checking

Figure 1-4 Checking LED1

M C
N AIL ONFIGURATION
VM8000
LED1.
Quick Setup