Start-Up Of The Dru - NEC NEAX 2400 ICS Manual

2.1 Start-up of the DRU

START
Set the MB switch of the DLI card UP.
Insert the DLI card into its mounting slot.
Plug the AC cord of the DRU into the AC outlet.
Turn ON the operating power to the DRU.
Set the MB switch of the DLI card DOWN.
Assign the office data of the DRU.
Lift the handset of a D
Save the office data onto a Hard Disk (HD) or a Floppy Disk (FD) using the "BKUP" command.
END
CHAPTER 4
Page 110
Revision CD 1.0
term
/Analog PB TEL and see if Dial Tone (DT) can be heard.
ND-45383 (E)