NEC Univerge SV8100 VM8000 InMail System Manual page 337

VM8000
47-10 VM8000 InMail Trunk Options
Description
Use 47-10 VM8000 InMail Trunk Options to assign VM8000 InMail options for each
trunk. Currently, only 47-10-01 Answer Table Assignment is available.
Options
InMail System Guide
See Automated Attendant on page
47-10-01 Answer Table Assignment (Answer Table)
Use this Use 47-10 VM8000 InMail Trunk Options option to assign an
VM8000 InMail Answer Table to each Direct Inward Line (DIL) the
Automated Attendant should answer. The Automated Attendant follows the
routing specified by the selected Answer Table.
For more on setting up DILs to VM8000 InMail, see

Attendant to Answer Outside
Options
Answer Use 47-10 VM8000 InMail Trunk Options Table (1~8)
Default
1 (Answer Use 47-10 VM8000 InMail Trunk Options Table 1)
47-10-02 Record Pad Control
Use this option to pad or attenuate the volume for messages recorded on or
greetings played to outside callers on a specific trunk.
Options
01 - 63 (-15.5dB to 15.5dB)
Default
32 (0.0 dB)
47-10-03 Voice Prompt Language
Use this option to specify the language used for each Subscriber Mailbox.
The VM8000 InMail comes with three language prompts: US English,
Mexican Spanish and Canadian French. Each mailbox can use any one of
these languages. Additional languages can be licensed on the CCPU and
the prompt sets downloaded from the support web page.
Options
01 - US English
02 - UK English
03 - Australian English
04 - French Canadian
2-45.
Calls.
Issue 1.0
Section 7 Set Up Automated
3 - 51