NEC Univerge SV8100 VM8000 InMail System Manual page 225

VM8000
1~32 (valid
Call Routing
InMail System Guide
Routed Announcement Mailbox Routing
(If outside caller routes to Announcement Mailbox from Call Routing Mailbox)
47-09-01
47-09-02
Next Call
Repeat
Routing
Count
Mailbox
Undefined 0 (No repeats)
0 (No repeats)
Mailbox)
Undefined x (x number of
repeats)
47-09-03
Hang Up
After
If the caller doesn't dial, after the
o
announcement the caller goes back to
the initial Call Routing Mailbox.
0 = None
If the caller dials a digit during the
o
1 = Goodbye
announcement, VM8000 InMail says
2 = Silent
"That is an invalid entry" and routes the
caller goes back to the initial Call Routing
Mailbox.
If the caller doesn't dial, after the
o
0 = None
announcement VM8000 InMail hangs up.
1 = Goodbye If the caller dials a digit during the
o
announcement, VM8000 InMail says
2 = Silent
"That is an invalid entry" and hangs up.
If the caller doesn't dial, after the
o
announcement they route to the Next Call
0 = None
Routing Mailbox.
1 = Goodbye
If the caller dials a digit during the
o
2 = Silent
announcement, they route to the Next
Call Routing Mailbox.
If the caller doesn't dial, after the
o
0 = None
announcement VM8000 InMail hangs up.
1 = Goodbye
If the caller dials a digit during the
o
announcement, they route to the Next
2 = Silent
Call Routing Mailbox.
If caller doesn't dial, they hear the
o
announcement x number of times and
then go back to the initial Call Routing
Mailbox.
0 = None
If the caller dials a digit during the
o
1 = Goodbye announcement, VM8000 InMail says
"That is an invalid entry" and aborts the
2 = Silent
announcement. The announcement
repeats (if allowed by the Repeat Count)
and then VM8000 InMail routes back to
the initial Call Routing Mailbox.
If caller doesn't dial, they hear the
o
announcement x number of times and
then VM8000 InMail hangs up.
0 = None
If the caller dials a digit during the
o
1 = Goodbye announcement, VM8000 InMail says
"That is an invalid entry" and aborts the
2 = Silent
announcement. The announcement
repeats (if allowed by the Repeat Count)
and then VM8000 InMail hangs up.
Issue 1.0
Action
2 - 197