NEC Univerge SV8100 VM8000 InMail System Manual page 248

Issue 1.0
2.
Operation
Not applicable
2 - 220
To have Screened Transfer call a specific extension, the corresponding
Number option should be that extension number. The caller then dials that
single digit to reach the extension.
For example, to have callers dial 8 to reach extension 303, for key 8 enter
H
TRF for the Action and 303 for the corresponding Number.
By default, key 1 Action is UTRF and Number is XXX. This means that Automated

Attendant callers can place Unscreened Transfers to extensions 101~199.
Set how long a Screened Transfer rings an unanswered extension before
recalling to the Automated Attendant.
47-08-02 Screened Transfer Timeout (Scrn Trf Timeout)
Set how long a Screened Transfer (TRF) from the Automated Attendant
rings (0~255 seconds) an unanswered extension before recalling.
Be sure that the 24-02-04 Transfer Recall Time is longer than the setting of
this option. If the Transfer Recall is shorter, Screened Transfers recalls the
same as Unscreened Transfers.
By default, this option is 15 seconds.

VM8000
Features