Table of Contents
Advertisement
LFO
Use this tab to adjust the settings for the low-frequency oscillators.
Parameter
LFO 1/LFO 2
Shape
Destination
Rate
Depth
Fade
Sync
Modulation
Source
Destination
Depth
Description
Waveshape of the low-frequency oscillator.
Where the low-frequency oscillator is sent.
Speed of modulation.
Amount of modulation applied.
Apply a fade-in or fade-out of the LFO signal.
Sync the LFO Rate to the Global Tempo or turn Off to
adjust Rate by Hertz.
Where the modulation signal is sent from.
Where the modulated signal is received.
Amount of modulation applied.
Value Range
Sine, Square. Saw Up,
Saw Down, Pump, S&H,
Drift
LFO1: Off, Pitch, Filter, Level,
Pan
LFO2: Pitch, Osc 1/2 Shape,
Osc 1/2 Pitch, LPF, Quad
Detune, Osc 2 EQ Freq,
Osc 2 EQ Gain, Ring
Level
When Sync is Off: 0.01 – 20.00 Hz
When Sync is On: 8/4 – 1/32
0–100%
0.00 – 20.00 s out,
No fade,
0.00 – 20.00 s in
Off, On
Filter Env, Amp Env, Osc
1, Osc 2
Pitch, Osc 1/2 Shape,
Osc 1/2 Pitch, LPF, Quad
Detune, Osc EQ 2 Freq,
Osc 2 EQ Gain, Ring
Level
-100 – 0 – 100%
99
Advertisement
Table of Contents
