Table of Contents
Advertisement
Keygroups
You can set the send levels for keygroups in Track Edit Mode or the Pad Mixer.
To set the send levels for a keygroup in Track Edit Mode:
1. While using the desired track, press the desired pad to select its keygroup. Alternatively, use the Keygroup field at
the top of the screen.
2. Tap the Effects tab in the lower-right corner.
3. Use the Send knobs to set the send level for each return.
To set the send levels for a keygroup in the Pad Mixer:
1. Tap the Send tab at the bottom of the screen.
2. Press the desired pad to select its corresponding keygroup, or tap it on the screen.
3. To set the send level, use the data dial or –/+ buttons. To make finer adjustments, double-tap the pad on the
screen and adjust the larger version of the knob that appears.
82
Advertisement
Table of Contents
