Akai FORCE User Manual page 176

Use the Tune field to transpose the sample up or down from its original pitch.
Tap From BPM to open the Edit Tuning window, which lets you tune a sample to the project.
Use the Beats field to match the number of beats in the sample.
To tune the sample to the project, tap Match. The Tune field will adjust automatically and close the window. The
sample is now tuned to the project.
To tune the sample to the project and adjust the project tempo, tap To Sequence. This is the same as tapping
Match but it also changes the project's tempo to the BPM shown in the Tempo field on the right.
To close the window, tap Close.
To enter a tempo manually, use the BPM field.
To detect the tempo automatically, tap Detect. In the Edit BPM window that appears, you can do any of the following:
•
Use the BPM field to enter a tempo manually.
•
Tap Detect to detect the tempo automatically.
•
Tap Tap Tempo at the bottom of the screen at the desired rate to use it as the tempo.
•
Tap Close, the X, or anywhere outside the window to close it.
176