Table of Contents
Advertisement
Sampler
The Sampler lets you record audio samples to use in your projects.
To open the Sampler, press Menu and then tap Sampler.
To set up the Sampler before recording:
1. Make sure to reduce the volume levels of your audio source and speakers, headphones, and/or monitors before you
make any connections to avoid "pops" or feedback.
2. Connect your audio source to the input/inputs of your Force hardware.
For line-level devices such as a synthesizer, set the Line/Inst switch to Line; for instrument-level devices such as a
guitar, set the switch to Inst.
If you are using a microphone that requires phantom power, set the +48V switch to On.
3. Turn the Gain knob to set the input level while playing your audio source. You should now see the level in the meter.
Make sure it does not exceed the maximum level (the meter should not be "peaking" constantly).
4. Set the recording controls as desired (described in this chapter).
5. Tap the Arm button to record-arm the Sampler.
193
Advertisement
Table of Contents
