Insert Effects; Pads - Akai FORCE User Manual

Insert Effects

Pads

You can load up to four insert effects to each pad. You can do this in the Pad Mixer or Track Edit Mode.
Tip: When using pad insert effects, they will be applied to the selected pad only. This means that you could apply
unique combinations of effects to each pad within a kit. If you want to apply the same effect to all pads, do this with a
track insert effect (see Insert Effects > Tracks).
To load a pad insert effect in the Pad Mixer:
1. Tap the Inserts & I/O tab at the bottom of the screen.
2. Press the desired pad to select it, or tap it on the screen. Swipe your finger to the left to scroll through the banks of
pads.
3. Tap an insert slot to open the effects window and use it to load or edit effects.
To load a pad insert effect in Track Edit Mode:
1. While using the desired track, press the desired pad to select it.
2. Tap the Effects tab in the lower-right corner, and use it to load or edit effects.
76