Table of Contents
Advertisement
The Generate Random Events function creates random melodic or
drum patterns in the current clip.
To select the type of events you want to create, use the Event
Type field to select Drum Events or Melodic Events.
To select how the events will be created relative to the
existing events on the track, use the Replace field:
Replace All Events: Select this option to replace all events in
the clip with the randomly generated ones.
Replace Events in Note Range: Select this option to replace
all events in the designated note range in the clip with the
randomly generated ones. Use the Bank or Start Pad and
End Pad menus to set the note range for drum events or the
Start Note and End Note menus to set the note range for
melodic events.
Add to Existing Events: Select this option to add the
randomly generated events to the clip without replacing or
overwriting the existing ones.
To set how many bars the events will use, use the Pattern Size
(Bars) field. The highest possible value is the number of bars in
the current clip.
To select the duration of the events, use the Note Length field.
(This feature is nonfunctional if Legato is enabled while generating
melodic events.)
To generate the events and keep this window open, tap Apply.
To generate the events and close the window, tap Do It.
To close the window without generating any events, tap Close.
If Event Type is set to Drum Events:
To select the pad bank that will be used to generate the
events, use the Bank field or select Range to use the Start
Pad and End Pad menus to define a specific pad range
instead.
To define a specific pad range over which the events will
be generated, use the Start Pad or End Pad fields. You can
use these fields only if the Bank menu is set to Range.
To set how closely together the events will be placed in
the clip, use the Density (%) slider.
To set how widely or narrowly the rhythmic patterns of the
generated notes vary, use the Rhythm Variation slider.
125
Advertisement
Table of Contents
