Table of Contents
Advertisement
If you set the Convert To field to New track with new samples, this
will create a new sample from each slice and assign them to pads in a
new track.
The new track will be named after the sample and appended with ch.
The new samples will be appended with SI-# (where # is a consecutive
number).
Check the Crop Samples box to delete the unused parts from the
sample when they are created and assigned. This feature is
destructive, though the project will still contain your original
sample.
Leave this box unchecked to keep the unused parts of the
samples when they're created and assigned. This way, you will
still be able to edit the entire samples further even though you are
using only part of them at the moment.
By default, this option already will create a new track. You can
uncheck the Create new track box to convert each slice into a
sample that is placed in the project's sample pool but not
assigned to a track or pad.
If Create new track is checked, check the Create Events box to
automatically create a new clip in the new track in which each pad
plays its corresponding slice in ascending sequence by pad
number.
If Create Events is checked, use the Bars field to set how many
bars the slices' events will occupy.
To convert the sample, tap Do It.
To cancel the operation, tap Close.
188
Advertisement
Table of Contents
