Xyfx Mode - Akai FORCE User Manual

XYFX Mode

XYFX Mode turns the touchscreen into an XY pad where each axis represents the range of an effect
parameter. As you move your finger on the XY pad, the current position will determine the current value of the
two parameters. You can use this mode to create interesting effect automation on your tracks.
The effect you control in XYFX Mode acts like an insert effect on that track. In fact, XYFX is the name of the
insert effect you have to load to the track before you can use this mode. Learn more about this in
Features >
To enter XYFX Mode, do either of the following:
•
Press Menu, and then tap XYFX.
•
Press and hold Shift and press Navigate.
When you first enter this mode in a project, you may be prompted to load XYFX to the track. Tap Insert XYFX to do this.
Note: If you already have four insert effects loaded, you will need to clear one of the insert effect slots before doing this.
Use the XYFX Location field to select the signal to which the effects will be applied: the current track (Track) or a
master output (a stereo pair of channels: Output 1/2 or Output 3/4).
Effects.
General
111