Chorus - Akai FORCE User Manual

Chorus

A chorus effect uses an LFO to modulate the pitch and a delay of the input signal, which are then added to the dry
signal. In small amounts, this creates the illusion of multiple voices playing at once. Turn up the Feedback and Depth
for more pronounced "shimmering" and "watery" sounds.
Options: AIR Multi-Chorus,
AIR Multi-Chorus
Chorus 2-Voice
Chorus 4-Voice
230
Chorus 2-Voice, Chorus 4-Voice
Parameter Value Range
Rate 0.01 – 10.0 Hz
Depth 0.00 – 24.00 ms
Voices 3, 4, 6
Mix 0–100% (dry–wet)
Chorus Low 20.0 Hz – 1.00 kHz
Cut
Chorus Width 0–100%
Mod Wave Sine, Tri
Mod Delay 0.00 – 24.00 ms
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Delay 0–100
Amount 0–100
Width 0–100
Feedback 0–100
Rate 0–100
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Delay 0–100
Amount 0–100
Width 0–100
Feedback 0–100
Rate 0–100
Default Value
1.00 Hz
6.00 ms
4
50%
20.0 Hz
100%
Tri
6.0 ms
Default Value
100
20
80
80
50
10
Default Value
100
20
80
80
50
10