Tracks - Akai FORCE User Manual

Tracks

You can load up to four insert effects to each track. You can do this in the Mixer or XYFX Mode.
Note: In XYFX Mode, the effects act like a single insert effect on that track. In fact, XYFX is the name of the insert effect
that is loaded when use this mode.
To load a track insert effect in the Mixer:
1. Tap the Inserts & I/O tab at the bottom of the screen.
2. Tap an insert slot to open the effects window and use it to load or edit effects.
To load XYFX for a track in XYFX Mode:
1. Select the desired track in another mode, and then enter XYFX Mode.
2. If you have not yet used XYFX Mode for this track, tap Insert XYFX on the screen to load it and show the XY pad.
Note: If you already have four insert effects loaded, you will need to clear one of the insert effect slots before doing
this.
If you have already used XYFX Mode for this track, the XY pad will appear.
3. Tap XYFX Location in the upper-left corner, and select Track.
4. If the Setup panel is not shown, tap Setup in the lower-right corner to show it.
5. Use the Preset field to load an effect. Use the controls below the Preset field to edit the effect.
78