Table of Contents
Advertisement
For reference, the Sample Length counter shows you the length of your sample during the
recording procedure.
Tap Arm to record-arm the Sampler. The button will then change to Record and show
Waiting for signal.
At that point, start recording by doing either of the following:
•
Start performing so that the incoming audio level exceeds the level of the
threshold slider.
•
Tap Record under the Sample Length counter.
To disarm the track instead, tap Cancel.
Use the Max Length field to define the maximum sampling time.
You can record up to 15 minutes and 59 seconds (15:59) per sample. We recommend
setting these to values that roughly match your estimated recording duration.
195
Advertisement
Table of Contents
