Akai FORCE User Manual page 94

Effects 2
Use this tab to adjust the settings for the Delay, Reverb, Compressor, Pumper and Limiter effects.
Parameter
Delay Time
Feedback
Freq
Mix
L/R
Reverb Pre-Delay
Time
Mix
Compressor Threshold
Ratio
Attack
Output
Pumper Rate
Depth
Release
Limiter Drive
94
Description
Amount of time between the dry signal and the
delayed signal.
Amount of signal fed back into the delay line.
Adjusts the filter cutoff frequency of the delayed
signal.
Wet/dry amount of the delay effect.
Reduces the delay Time in either the Left or Right
stereo field. This is useful for creating offset, panned
delays.
Length of time between dry signal and reverberated
signal.
Length of reverb tail.
Wet/dry amount of the reverb effect.
Signal level after which the compressor will be
applied.
Amount of compression applied.
Length of time to apply the compression.
Amount of additional output gain for the compressed
signal.
Speed of the pumper effect.
Amount of signal attenuation by the effect.
Amount of time to release the effect.
Amount of drive added after the limiter effect.
Value Range
1/32 – 8/4
0–100%
0–100%
0–100%
L 50:100 – R 100:50
0.0 – 250.0 ms
0.0 – 30.0 s
0–100%
-30.0 – +10.0 dB
1.0:1 – 20.0:1
0–100%
-20.0 – +20.0 dB
Bar, 1/2 – 1/32T
0–100%
0–100%
0.0 – 32.0 dB