Table of Contents
Advertisement
The Silence process replaces the region between the start point and
end point with silence.
The Extract process deletes the regions before the start point and
after the end point and saves it as a new sample in your current
project.
Use the Edit Name field (and the virtual keyboard that appears) to
name the new sample.
Tip: This is useful if you recorded a drum loop and wanted to remove
just a snare drum hit, a kick drum hit, etc. to use separately in the
project.
The Normalize process increases a sample's level to the highest level
possible without distortion. This is essentially a kind of digital gain
optimization, so you do not have to worry about excessive level
settings when working with samples with a wide range of amplitudes.
The Reverse process reverses the region between the start point and
end point.
181
Advertisement
Table of Contents
