Table of Contents
Advertisement
Master
In the Master tab, you can set the playback mode and tuning for the overall Track.
Polyphony sets the playback mode for the track's pads. In Mono Mode, only one pad will sound at a time. If a pad is
played while another (or the same one) is still playing its sample/samples, the new pad will immediately mute all other
currently playing pads in that track. In Poly Mode, several pads can be triggered at the same time (limited only by the
total number of voices available).
Semi lets you transpose the track up to 36 semitones up or down.
Fine provides fine-tuning of the track up to 99 cents up or down.
Volume controls the overall volume level of the loaded sample/samples.
Pan controls the overall panning of the loaded sample/samples in the stereo field.
The Simultaneous Play section lets you set up to four pads that can be triggered by pressing one pad only. This function is
useful for triggering a stack of sounds (e.g., layered kick drums). Use each Pad field to select the desired pad.
The Mute Targets tab lets you select up to four pads (in the same track) for the currently selected pad. When the
currently selected pad is played, it will immediately silence its mute targets. Use each Pad field to select the desired
mute target.
Tips:
This feature is useful for programming realistic hi-hats, especially if only the open or closed hat should be heard.
This feature is similar to the mute group feature, available for both drum tracks and keygroup tracks.
138
Advertisement
Table of Contents
