Pad Mixer - Akai FORCE User Manual

Pad Mixer

In the Pad Mixer, you can set levels, stereo panning, and other settings for individual pads. This mode is
only available for Drum and Keygroup tracks.
To open the Pad Mixer, do either of the following:
•
Press Menu, and then tap Pad Mixer.
•
Press and hold Shift and press Mixer.
Just like the track Mixer, the Pad Mixer works like an audio mixer with various settings for each pad, with up to 8 pads
shown on the display at once. The name of the pad is displayed at the top of each one.
To select a pad, tap it or press the respective clip select button in Note mode.
To view more pads, drag your finger left and right on the display.
To open the Pad Mixer configuration, tap the Settings icon in the lower-right corner of the screen to edit the Pad
Mixer configuration.
Check the Filter by events box to show only pads with events.
Check the Filter by samples box to show only pads with samples assigned.
Check the Write automation when recording box to set automation to always write when recording.
215