Akai FORCE User Manual page 98

Envelope
Use this tab to adjust the various envelope settings.
Parameter
Filter Envelope Attack
Decay
Sustain
Release
Amp Envelope Attack
Decay
Sustain
Release
Envelope 3 Start Level
Start Time
Slope Hold
Slope Rel
Destination
98
Description
Length of time for the filter to reach full level.
Length of time for the filter to reach sustain level.
Level that a sustained note is held at, as a percentage
of the maximum level.
Length of time for the filter to dissipate when released. 1.00 ms – 100 s
Length of time for the note to reach full level.
Length of time for the note to reach sustain level.
Level that a sustained note is held at, as a percentage
of the maximum level.
Length of time for the note to dissipate when released. 1.00 ms – 100 s
Initial velocity level of the envelope.
Length of time for the envelope to start.
Amount of Envelope subtracted from or added to the
Destination when a note is held.
Amount of Envelope subtracted from or added to the
Destination when a note is released.
Where the envelope will be applied to.
Value Range
1.00 ms – 100 s
1.00 ms – 100 s
0–100%
1.00 ms – 100 s
1.00 ms – 100 s
0–100%
0–100%
0–5000 ms
-100 – 0 – +100%
-100 – 0 – +100%
Off, Pitch, Osc 2 Pitch,
LFO 1/2 Rate, Osc1 Quad
Det., Osc 1/2 Shape, Osc
1/2 Level, Ring Level