Table of Contents
Advertisement
Pan Velocity
Use the pan knob to adjust the stereo placement of the respective layer.
Use the Vel Start and Vel End knobs to define the velocity range of each layer.
A range from 0 to 127 lets the layer respond to the entire velocity range which is input from the respective pad while, for
example, a range from 100 to 127 lets the layer respond only to higher velocity levels. By assigning several samples of
one instrument, you can create a realistic-sounding "multi-sample" by adjusting the velocity ranges of each layer
accordingly.
For example, you may have three samples of a drum hit with low force, medium force, and high force. You can set each
sample to a layer and set the Velocity ranges so only low velocities trigger the low-force sample, only mid-range
velocities trigger the medium-force sample, and only high velocities trigger the high-force sample.
146
Advertisement
Table of Contents
