Table of Contents
Advertisement
Pads
You can set the send levels for individual pads in Track Edit Mode or the Pad Mixer.
To set the send levels for a pad in Track Edit Mode:
1. While editing the desired clip in Track Edit Mode, press the desired clip launch pad to select it.
2. Tap the Effects tab in the lower-right corner.
3. Use the Send knobs to set the send level for each return.
To set the send levels for a pad in the Pad Mixer:
1. Tap the Sends tab at the bottom of the screen.
2. Press the desired pad to select it, or tap it on the screen.
3. To set the send level, use the data dial or –/+ buttons. To make finer adjustments, double-tap the knob on the
screen and adjust the larger version of the knob that appears.
81
Advertisement
Table of Contents
