Plugins; Bassline - Akai FORCE User Manual

Plugins

Force includes four new plugins from AIR Music Technology to help you get started making music right out of the box.
To learn more about plugin tracks, see

Bassline

The AIR Bassline plugin emulates the sound of classic mono synths,
with a contemporary twist.
Osc / Filter / Envelope
Use this tab to adjust the settings for the oscillators, as well as their
filter and envelope settings.
Parameter
Oscillator Waveform
Sub-Octave
Fifth
Start Phase
Glide Time
Boost
Boost Freq.
Boost Envelope Amount of effect of the envelope on the Boost
Filter LP Cutoff
Reso
Filter Env
HP Cutoff
Envelope Amp Attack
Amp Decay
Filter Decay
Pitch Mod
84
Operation > General Features > Tracks > Plugin
Description
Continuously variable waveshape for the oscillator. Saw Octave, Saw, Square, Sine
Amount of sub-octave oscillator.
Amount of fifth-oscillator.
Position of the waveform when a note is triggered. Free, 0 degr., 180 degr.
Amount of time to slide from the pitch of one note
to the next note played.
Boosts the signal of the oscillator.
Center frequency of the boost.
section.
Adjust Gain to control the amount of boost.
Adjust Frequency to control the width of the
boosted frequency.
Cutoff frequency for the low-pass filter.
Resonance of the filter.
Envelope of the filter.
At negative values, decreases the cutoff value
based on the filter decay value.
At positive values, increases the cutoff value
based on the filter decay value.
Cutoff frequency for the high-pass filter.
Length of time for the note to reach full volume.
Length of time for the note to reach the sustained
volume.
Length of time for the filter to reset after being
released.
Amount of pitch modulation applied to the
envelope.
Tracks.
Value Range
0–100%
0–100%
10.0 ms – 2.00 s
0.0 dB – 48.0 dB
* 1.0 – * 240.0
Gain 100–0%, Off, Frequency
0–100%
20.0 Hz – 20.0 kHz
0–100%
-100% – 0 – 100%
10.0 Hz – 500 Hz
100–0% Soft to 0–100% Hard
0–100%
0–100%
0–100%