Akai FORCE User Manual page 69

Use the Time Division selector to set the quantization value. Events will "snap" to these time divisions on the grid. The
T indicates a triplet-based value.
Use the Swing field to set the amount of swing from 50% to 75%. Swing lets you "shuffle" your beats—from subtle to
extreme.
Use the Shift Timing field to shift all events by clock ticks.
Use the Window field to set how many events around a quantize value will be quantized. Any events outside this range
will not be quantized; events inside will.
Use the Strength field to set how strictly events will be quantized (i.e., shifted toward the quantize value). Lower values
move events a little bit towards the closest quantize value, resulting in a less mechanical feel than a strict quantization (a
higher value).
Use the Events selector to set the target range for the time correction.
You can apply the time correction to All note events or to just the
Selected ones.
To select note events to which to apply time correction, either use the
various tools in Event View or Region View or press the pad with the
desired events (while Hitting Pad Selects All Events is set to On).
You must do this before opening the Timing Correct window.
When Range is selected, you can define the locations (From and To)
as well as the pads or keys that will be quantized.
69