Cv Tracks - Akai FORCE User Manual

CV Tracks

A CV track lets you send your control voltage (CV) signals to an external device like a synth or drum machine that uses CV.
To create a CV track:
1. Press Matrix to enter Matrix Mode.
2. At the top of the screen, press the + icon to add a new track.
If you cannot see the + icon, press the right cursor to move the matrix
view until it is shown.
3. In the window that appears, turn the data dial to select CV as the track
type.
If you would like to create more than one CV track at once, use the
Number of tracks field to select how many tracks you would like to
create.
4. Tap Do It to confirm, or tap Close, the X or outside the window to go
back. A new CV track will be created and appended with a number (e.g.,
CV 002).
Alternatively, press and hold the track select button of an unused track, then tap CV.
To edit the track settings, double-tap the track name at the top of the screen to open the Track Settings window.
To rename the track, tap the track name field and use the virtual keyboard that appears to enter a new name, and
then tap Do It to confirm or the gray bar at the top of the screen to cancel.
To change the track color, tap the color field and use the data dial or -/+ buttons to scroll through the options. You
can also double-tap the color field and then swipe up or down, use the data dial or -/+ buttons to scroll through the
options.
To transpose the CV track, tap the transpose field and use the data dial or -/+ buttons to set the transposition
amount.
There are five additional settings to configure for a CV track: the CV Port, the Gate Port, the modulation wheel port
(Mod Wheel Port), Velocity Port and Note Priority. Tap each field and use the data dial or -/+ buttons to edit the
setting.
59