Table of Contents
Advertisement
To adjust the effect's parameters, tap the pencil icon. Use the sliders to set the value of each parameter. These
values affect only this instance of the effect; insert effects are not global.
To load an effect preset, tap the folder icon next to the preset name at the top of the display to open the file browser.
To save a new effect preset, tap the disk icon next to the insert selector at the top of the display.
Sends
The audio of the track will be routed to send effects (if you have any loaded) at their designated send levels. The return
channels will then send the audio to an assigned master output at the designated return levels.
Use the Send knobs to set the volume level of the signal the track will route to each send effect.
You can select up to four send effects for each keygroup, but remember that they will be applied to that keygroup only.
Keep this in mind if you load insert effects to multiple keygroups with overlapping note ranges—the effects will overlap
in that range as well.
Important: To use a send effect, you have to load an effect into the corresponding send effect slot in the Mixer. See
General Features > Effects > Send/Return Effects
to learn more how to do this.
167
Advertisement
Table of Contents
