Table of Contents
Advertisement
Project
In the Project Knobs Edit Mode, the knobs control 16 parameters within the current project.
Next to the top row of knobs on the screen, tap one of these tabs to select the type of parameters you want to control
with the knobs:
•
Track: track parameters. Use the Track field to select one of the tracks in your project.
•
Return: return parameters. Use the Return field to select one of Returns 1–4.
•
Master: master parameters. Use the Master field to select one of the output pairs, Outputs 1/2 or 3/4.
If a Drum Track is selected, use the Type selector to determine whether the knobs will control the parameters of the entire
track (Track) or for a single pad (Pad).
To select a track, use the Track field next to the top row of knobs on the screen.
To select a pad (if Type is set to Pad), use the Pad field.
Next to the second row of knobs on the screen, tap one of these tabs to select the type of parameters you want to
control with the knobs:
•
Mixer: general mixer parameters
•
Track: general track parameters
•
Insert 1–4: parameters for its track insert effects
205
Advertisement
Table of Contents
