Akai FORCE User Manual page 206

Use the Parameter field to select the parameter you want to control with the currently selected knob. When the Track
tab is selected, the following options are available.
When a Drum Track is selected, and Type is set to Track:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Track: Off, Master Semi Tune, Master Fine Tune
Insert 1–4: Off, other available parameters depending on the effect
When a Drum Track is selected, and Type is set to Pad:
Mixer: Off, Level, Pan, Pad Mute, Pad Solo, Send 1–4
Track:
Off
Tuning
Filter Cutoff
Filter Resonance
Filter Env Amount
Amp Env Attack
Amp Env Decay
Amp Env Release
Insert 1–4: Off, other available parameters depend on the effect
When a Keygroup Track is selected:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Track: Off, Master Semi Tune, Master Fine Tune
Insert 1–4: Off, other available parameters depending on the effect
When a Plugin Track is selected:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Track: Off, other available parameters depending on the plugin
Insert 1–4: Off, other available parameters depending on the effect
When a MIDI Track is selected:
MIDI CC: Standard MIDI control change assignments
When a CV Track is selected:
Mixer: Off, Mute, Solo
Track: Off, CV Out 1–4
When an Audio Track is selected:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Insert 1–4: Off, other available parameters depending on the effect
206
Amp Env Hold Layer Sample Pan (1–4)
Amp Env Sustain Layer Semi Tune (1–4)
Filter Env Attack Layer Fine Tune (1–4)
Filter Env Hold Velocity to Start
Filter Env Decay Vel to Filter Attack
Filter Env Sustain Velocity to Env Amount
Filter Env Release Velocity to Filter
Layer Level (1–4) LFO to Pitch
LFO to Filter Velocity to Amp
LFO to Amp Velocity to Pan
LFO to Pan Layer Direction (1–4)
LFO Wave Layer Offset (1–4)
LFO Rate
LFO Sync
Velocity to Pitch
Vel to Volume Attack