Table of Contents
Advertisement
Instructions for use
4.1.2 Preparations before filling
12.
Grille for drying zone fan
13.
Door lock
14.
Main switch
15.
Wash nozzle
16.
Wash arm
17.
Curtain
18.
Door
19.
Tank filters
20.
Pump filter
21.
Rubber sleeve
22.
Level pipe
23.
Door
24.
Outlet seal
25.
Filter
26.
Filter for the final rinse
27.
Timer for a timed start of the machine (option)
28.
Button for activating the timer (option)
In the following chapter, figures are given in brackets to clarify what is being re-
ferred to.
These numbers refer to image and list above.
Check:
•
That the machine and removable parts have been cleaned. If not – clean
them!
•
that the main switch (14) is in the ON position
•
That the stopcock for the water to the machine is open
•
That removable parts are correctly in place
•
that no dirt is in the wash arms' (16) or in the rinse pipes' (15) nozzles
•
Amount of detergent and drying agent (option)
Fit:
•
Level pipe (22) and outlet seal (24). The rubber sleeves (21) must seal aga-
inst the base plate. Check that they are not damaged.
•
strainers (19, 26)
•
curtains (17)
Close the doors.
WD-215T
21
Rev. 6.0 (201812)
Advertisement
Table of Contents
