Table of Contents
Advertisement
Installation instructions
3. Installation instructions
Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS
carefully before starting work.
3.1 General information
Read these instructions carefully, as they contain important information regarding
the correct installation method.
•
•
•
3.2 Requirements for the installation site
3.2.1 Lighting
In order to ensure the best possible working conditions during installation, opera-
tion, servicing and maintenance, make sure that the machine is installed in a well-
lit room.
3.2.2 Ventilation
The machine produces heat and steam when in operation. In order to ensure the
best possible working conditions, a certain air renewal rate is required in the
dishwashing room. The ventilation requirements for the dishwashing room are to
be dimensioned on the basis of the applicable standards.
3.2.3 Power supply
Power supply connections are made by qualified personnel in a way that complies
with local and national regulations. The machine's capacity requirements are sti-
pulated in TECHNICAL SPECIFICATIONS.
WD-215T
The instructions should be used together with the machine's wiring dia-
gram and flow diagram for water and steam. These can be found in the
machine's electrical cabinet.
The machine can be equipped with a number of different options. Certain
options may be standard in a number of countries. Check what your machi-
ne is equipped with.
If holes need to be drilled in the machine, the holes must be fitted with an
edge strip or similar protection.
8
Rev. 6.0 (201812)
Advertisement
Table of Contents
