Table of Contents
Advertisement
Instructions for use
Checking, changing and removal of set start time
If the buttons have not been pressed for at least 60 seconds while in check infor-
mation mode, the display returns automatically to normal display mode.
Checking of set start times, days of the week:
Hold down the CHECK button for approx. 1 second until the display changes state.
•
By pressing repeatedly on CHECK,
you can scroll through every set start
time.
•
If several start time settings are sto-
red, they are numbered as r01, r02
and so on.
•
Once you have scrolled past the last
stored start time, the display returns
to its normal state.
Checking of set start times, date:
Hold down the CHECK button for approx. 3 seconds.
•
By pressing repeatedly on CHECK,
you can scroll through every set start
time.
•
If several start time settings are sto-
red, they are numbered as r01, r02
and so on.
•
Once you have scrolled past the last
stored start time, the display returns
to its normal state.
Changing set start times, days of the week:
Hold down the CHECK button for approx. 1 second.
•
Scroll forward to the start time set-
ting to be changed by pressing
CHECK.
•
Hold down the SET button for app-
rox. 3 seconds.
WD-215T
The arrow symbol flashes
31
Rev. 6.0 (201812)
PULSE
90-9-05-019
PULSE
90-9-05-020
PULSE
90-9-05-019
Advertisement
Table of Contents
