Preparations Before Filling - Wexiodisk WD-90 DUO Installation And User Manual

Operating instructions

4.1.2 Preparations before filling

Check:
•
•
•
•
•
•
•
•
•
•
Remember:
•
•
•
•
•
WD-90 DUO
The machine and removable parts have been cleaned. If not – clean them!
there is no dirt in the wash arms or in the initial rinse pipes' nozzles
the level sensors in the tank are not dirty
the water tank has been rinsed out.
there is enough granules in the machine, and that they are only in that part
of the tank intended for them.
amount of detergent and drying agent (option)
removable parts are correctly in place
the stopcock(s) for water for the machine is open
the power switch is in the ON position
the machine's ON/OFF control button is on
Ordinary washing-up liquid must not be used in the machine or for soaking.
Contact your detergent supplier regarding the choice of a suitable deter-
gent. Washing-up liquid causes a build-up of foam, produces poor wash re-
sults and can damage the machine.
Steel wool must not be used for pre-treating the dishware.
Only detergent and drying agent intended for industrial machines may be
used.
If using liquid detergent and drying agent, the same make and type of de-
tergent and drying agent should be used.
If the machine is equipped with a condensing unit, dishware should be re-
moved from the machine as soon as the wash cycle is complete so that re-
condensation does not occur.
50
Rev. 2.0 (202204)