Table of Contents
Advertisement
Instructions for use
4.1.2 Preparations before filling
Check:
•
•
NOTE: Ordinary washing-up liquid must not be used in the machine or for soak-
ing. It causes foam to form and produces poor washing results.
Fit:
•
•
•
4.1.3 Filling and heating the machine
•
•
•
•
•
WD-B 500 - WD-B 900
that the machine has been cleaned and that the stopcocks for the water are
open.
the amount of detergent and drying agent.
the outlet seals (27). The rubber sleeve (25) on the outlet seals must seal
against the bottom plate.
strainers (24, 29).
curtains (21)
The doors must be closed.
Press button (12) to switch on the power supply.
Press button (6). The filling and heating process will begin.
When the machine is filled and heated, it starts and runs for a while to mix
the detergent.
When the detergent is mixed, the message on the display indicates that the
feed should start. Start the conveyor belt by pressing button (8).
30
Rev. 4.0 (201208)
Advertisement
Table of Contents
