Table of Contents
Advertisement
Operating instructions
4.1.4 Preparations before filling
In this chapter, figures are given in brackets from the figure beneath chapter 4.1.1
Machine design.
Check:
•
•
•
•
•
•
•
Remember:
•
•
•
•
Symbol
Explanation
Medium wash program
without spin dry
Spin dry
Return / Back
that the machine and removable parts have been cleaned. If not – clean
them!
that the rubber sleeve (20) is not damaged.
that removable parts are correctly in place (19, 20, 22).
the drain tap (11) must be closed.
the amount of detergent and drying agent.
that the stopcock for the water to the machine is open.
that the main switch is in the ON position. When the main switch is set to
the ON position, it will take up to 25 seconds before the ON/OFF button
(24) illuminates blue and the machine switches to standby mode.
Ordinary washing-up liquid must not be used in the machine or for soaking.
Contact your detergent supplier regarding the choice of a suitable
detergent. Washing-up liquid causes a build-up of foam, produces poor
wash results and can damage the machine.
Steel wool must not be used for pre-treating the dishware.
Only detergent and drying agent intended for industrial machines may be
used.
Use the same make and type of detergent and drying agent.
WD-18CW
Symbol
29
Rev. (202211)
Explanation
Medium wash program
with spin dry
Menu
Advertisement
Table of Contents
