Table of Contents
Advertisement
Operating instructions
4.1.2 Preparations before filling
Machines without a drain pump
Check and fit:
•
That the machine and removable parts have been cleaned. If not – clean
them!
•
that no dirt is in the wash arms' (14) or in the rinse pipes' (12) nozzles
•
That removable parts are correctly in place
•
The amount of detergent and drying agent
•
That the stopcock for the water to the machine is open
•
That the power switch is in the ON position
Machines with a drain pump (option)
Check and fit:
•
That the machine and removable parts have been cleaned. If not – clean
them!
•
that no dirt is in the wash arms' (16) or in the rinse pipes' (10) nozzles
•
That removable parts are correctly in place
•
The amount of detergent and drying agent
•
That the stopcock for the water to the machine is open
•
That the power switch is in the ON position
Detergent and drying agent
Remember:
•
Ordinary washing-up liquid must not be used in the machine or for soaking.
Contact your detergent supplier regarding the choice of a suitable
detergent. Washing-up liquid causes a build-up of foam, produces poor
wash results and can damage the machine.
•
Steel wool must not be used for pre-treating the dishware.
•
Only detergent and drying agent intended for industrial machines may be
used.
•
If using liquid detergent and drying agent, the same make and type of
detergent and drying agent should be used.
WD-6C
27
Rev. 7.0 (202202)
Advertisement
Table of Contents
