Operating instructions
4.1.2 Preparations before filling
Check and fit:
•
•
•
•
•
•
•
•
•
•
Glasstilt
That the machine and removable parts are complete and have been
cleaned. If not – clean them
That no dirt is in the wash arms' (17) or in the rinse pipes' (15) nozzles
That removable parts are in place, level pipe (12), tank filter and cover
plates (13).
The rubber sleeve (11) must seal against the base plate.
Including drain filter on machines with a drain pump (22)
Glas_03
On DUPLUS machines: filter for recirculating rinse (23)
Glas_01
Check that the lower washing arm (16) can rotate freely
Glas_02
The amount of detergent and drying agent
That the stopcock for the water to the machine is open
That the power switch is in the ON position
32
Rev. 2.0 (202202)