Instructions for use
Changing the set start times, date:
•
Press the SET button.
•
Set start date, stop date, start time
and pulse length in the same way as
described under "Setting the start ti-
me, date"
•
The display returns to check infor-
mation mode when the SET button is
pressed after the pulse length has
been changed.
•
You can choose here to scroll further
to the next set start time by pressing
the CHECK button or to exit the
check information mode by holding
down the MODE button for approx. 3
seconds (if the buttons have not
been pressed for at least 60 se-
conds, the display returns automati-
cally to normal display mode).
Removal of set start time:
Start time, day of the week: Enter check mode by holding down the CHECK button for
approx. 1 second.
Start time, date: Enter check mode by holding down the CHECK button for approx. 3
second.
•
Scroll forward to the start time set-
ting to be removed by pressing the
CHECK button.
Hold down the SET button for approx. 3 seconds.
WD-215T
Edt flashes
START and adjustable value flas-
hes
r02 flashes
33
Rev. 6.0 (201812)
PULSE
P
90-9-05-023
PULSE
P
90-9-05-024
PULSE
90-9-05-025
PULSE
90-9-05-019