Table of Contents
Advertisement
Installation instructions
3.2.4 Water
Water connections are made by qualified personnel in a way that complies with
local and national regulations. The machine's capacity requirements are stipula-
ted in TECHNICAL SPECIFICATIONS.
3.2.5 Drain/waste pipe
There must be a waste pipe with an effective trap for the machine's waste water
and for water used for rinse cleaning. The machine's capacity requirements are
stipulated in TECHNICAL SPECIFICATIONS.
3.2.6 Space for servicing
A 1-metre area should be left clear in front of the machine for servicing purposes.
The area above the machine must not contain any equipment that may prevent
the fitting, servicing and replacement of parts. Depending on if the machine has
different accessories, there may also be such a requirement at the infeed and out-
feed ends as well as above the machine.
WD-215T
9
Rev. 6.0 (201812)
Advertisement
Table of Contents
