Table of Contents
Advertisement
Technical information
The manufacturer reserves the right to make changes to the technical data.
* When the machine is steam-heated
** in accordance with EN 60 335-2-58, §ZAA.2.8 with instruments that satisfy
class 1.
Measurements of the sound pressure level on site are performed in three places
20 cm from the edges of the front at a height of 1.55 m using a microphone.
When measuring sound power level, create an imaginary measurement area
consisting of five sides at a distance of 1 m from all edges of the machine.
5. Technical information
Technical data
Pump motor chemical wash (kW)
Pump motor, recirculating rinse (kW)
Condensing fan (kW)
Drying zone fan I (kW)
Drive motor, belt (kW)
Booster heater (kW)
Pump motor, final rinse (kW)
Tank heater (kW)
Heater, drying zone (kW)
Heat recovery, cooling surface (m²)
Condensing fan, capacity (m³/hour)
Tank volume (litres)
Tank volume, final rinse tank (litres)
Weight, machine in operation (kg)
Enclosure protection class (IP)
Capacity and operating data
Capacity (trays/hour)
Max. tray size (mm)
Cold water consumption final rinse (litres/hour)
Steam consumption at 150 - 250 kPa (kg/hour) *
Steam consumption at 50 - 140 kPa (kg/hour) *
L
Sound pressure level,
PA
L
(dBA)
Sound power level
WA
Connection, electrically-heated machines
Total connected power (kW)
*
Main fuse 400 V 3N~ (A)
Max. connection area 400 V 3N~ (L1-L3, N, PE) Cu (mm²)
*
Main fuse 230 V 3~ (A)
WD-215T
(dBA)
**
**
46
Rev. 6.0 (201812)
1.5
0.11
0.12
1.1
0.12
12
0.11
12
6
25
100
100
4
620
55
960
530x330
150
40
40
69
83
36
63
35
125
Advertisement
Table of Contents
