Table of Contents
Advertisement
Installation instructions
3.5 Connections
8
A
6,7
Installation drawing
A = Perforation in the end plate for drain connection
1.
Electrical connection.
2.
Cold water connection
3.
Hot water connection
4.
Reducing valve. The valve is used to adjust the final rinse flow.
5.
Drain connection 50 mm.
6.
Steam connection (steam-heated machines) (option)
7.
Condensation water connection (option, steam-heated machines).
8.
Alternative electrical connection from floor behind the front panel.
9.
Alternative cold water connection from floor behind the machine.
10.
Alternative hot water connection from floor behind the machine.
In the following chapter, figures are given in brackets to clarify what needs to be
done. These numbers refer to image and list above.
WD-215T
1
5
12
Rev. 6.0 (201812)
2
3
9
WD215T_12_R2
4
10
A
Advertisement
Table of Contents
