Table of Contents
Advertisement
Safety instructions
2. Safety instructions
Read the chapter GENERAL INSTRUCTIONS carefully before starting work.
2.1 General information
The machine is CE marked, which means that it complies with the requirements
of the EU Machinery Directive with regard to product safety. Product safety
means that the design of the machine will prevent personal injury or damage to
property. The CE mark is only valid for an unmodified machine. Any damage to
the machine arising from failure to follow the instructions will invalidate the supp-
lier's warranty and product liability.
Installation, repairs and servicing must be performed by an authorised engineer
in accordance with local and national rules in effect for such work with water and
drainage systems, electricity, ventilation and steam. We recommend that the
work is performed by the manufacturer or one of the manufacturer's authorised
service companies.
To further improve safety during installation, operation and servicing, the operator
and the personnel responsible for installing and servicing the machine should
read the safety instructions carefully.
The machine's electronics are sensitive to electrostatic discharge (ESD), which is
why a static electricity wristband must be used when handling the electronics at
all times.
Before the machine enters service, ensure that the personnel are given the ne-
cessary training in handling and looking after the machine.
In order to avoid dangerous situations, the following must be followed:
•
•
•
•
•
WD-215T
Switch off the machine immediately in the event of failure or malfunction.
Make sure the machine is non-live before removing the cover plate. Turn
off the power using the power switch. If required, the switch must be locked
to prevent unintentional operation.
Shut off the tap for incoming water and drain the machine's tank(s) before
starting work. Let the machine cool down as pipes for water, washing
pumps, booster heaters and valves become very hot when the machine is
in operation.
The machine and equipment requires an annual service. The machine
should be serviced by a person authorised or trained to do so by us. Use
original spare parts.
Warranty repairs must be performed by an authorised company. Contact
an authorised service company to draw up a programme of preventive care
5
Rev. 6.0 (201812)
Advertisement
Table of Contents
