Table of Contents
Advertisement
Safety instructions
•
2.2 Transport
Handle the machine with care during unloading and transport; there is a risk of it
tipping over. Never lift or move the machine without using the wooden packaging
to support the stand.
2.3 Installation
•
•
•
For increased safety, it is recommended to equip the installation with a ground
fault circuit interrupter.
2.4 Detergent and drying agent
Be aware of the risks involved in handling detergents and drying agents. Protec-
tive gloves and safety glasses should be used when handling, and an eyebath
should be within easy access. Read the warning text on the detergent and drying
agent containers as well as the detergent supplier's instructions.
2.5 Operation
Be very careful around the machine when it is in operation.
2.5.1 High temperatures
•
•
2.5.2 Risk of crushing
The machine, and any equipment, has moving parts before, during and after
washing. Be careful therefore to avoid crushing injuries. In connection with servi-
ce or repairs that require the hood to be open, it must be secured by means of a
prop for example.
WD-215T
and maintenance. For authorised service companies, please see
www.wexiodisk.com or contact Wexiödisk AB.
The regular checks described in the manual must be carried out in accor-
dance with the instructions.
The machine is designed for quick electrical installation.
The machine must be connected to a lockable main switch.
Make sure that the mains voltage is the same as that indicated on the
machine's rating plate.
The temperature of the washing and rinsing water is 60° C and 85°C. Do
not open the machine until the rinsing phase has finished. The steam that
comes out of the machine after the wash has been completed is hot.
Avoid touching hot pipes and booster heaters. The machine's outer jacket
can also become hot during operation.
6
Rev. 6.0 (201812)
Advertisement
Table of Contents
