Saddle Stitcher Controller Pcb - Canon Saddle Finisher-T2 Service Manual

F-3-321
3.4.4.2 Removing the Escape
Delivery Static
Eliminator
1) Remove two screws [1] and remove the escape
delivery static charge eliminator [2].
F-3-322
A ground plate [1] is provided in the area where the
escape delivery static charge eliminator [2] is
mounted. When mounting the escape delivery static
charge eliminator [2], insert it in the lateral
direction.
[2]
[1]
Charge
0009-4175
F-3-323

3.4.5 Saddle Stitcher Controller PCB

3.4.5.1 Removing the PCB
Cover
1) Remove seven screws [1] and remove the PCB
cover [2].
F-3-324
3.4.5.2 Removing the Saddle
Stitcher Controller PCB
1) Remove the all connectors [1] and four screws [2],
and remove the saddle stitcher controller PCB [3].
Chapter 3
0009-4124
[7]
[1]
0009-4123
3-79