E540;Tray 1 Shift Motor Error; E542;Tray 2 Shift Motor Error; E584;Shutter Malfunction - Canon Saddle Finisher-T2 Service Manual

4.4.1.10 E540;Tray 1 shift motor error

Tray 1 paper surface sensor (PI114)
1) Check the tray 1 paper surface sensor. Does it operate normally?
NO : Replace the sensor.
Tray 1 shift area sensor PCB
2) Check the tray 1 shift area sensors 1 to 3. Do the sensors operate normally?
NO : Replace the tray 1 shift area sensor PCB.
Wiring
3) Is the wiring between the finisher controller PCB and tray 1 shift motor normal?
NO : Repair the wiring.
Tray up/down mechanism
4) Is there any abnormality in the tray up/down mechanism?
YES : Repair the tray up/down mechanism.
Tray 1 shift motor (M107)/Finisher controller PCB
5) Does it improve when the tray 1 shift motor is replaced?
YES : End
NO : Replace the finisher controller PCB.

4.4.1.11 E542;Tray 2 shift motor error

Saddle delivery tray unit
1) Is the saddle delivery tray unit closed properly (not closed on one side)?
NO : Properly close the saddle delivery tray unit.
Tray 2 paper surface sensor 1 (PI115)/Tray 2 paper surface sensor 2 (PI120)
2) Check the tray 2 paper surface sensor 1 and the tray 2 paper surface sensor 2. Does it operate normally?
NO : Replace the sensor.
Tray 2 shift area sensor PCB
3) Check the tray 2 shift area sensors 1 to 3. Do the sensors operate normally?
NO : Replace the tray 2 shift area sensor PCB
Wiring
4) Is the wiring between the finisher controller PCB and tray 2 shift motor nor-mal?
NO : Repair the wiring.
Tray up/down mechanism
5) Is there any abnormality in the tray up/down mechanism?
YES : Repair the tray up/down mechanism.
Tray 2 shift motor (M108)/Finisher controller PCB
6) Does it improve when the tray 2 shift motor is replaced?
YES : End
NO : Replace the finisher controller PCB.

4.4.1.12 E584;Shutter malfunction

Shutter home position sensor (PI113)
Chapter 4
0009-2596
0009-2600
0009-2598
4-15