Basic Operation (Saddle Stitcher Unit) - Canon Saddle Finisher-T2 Service Manual

Chapter 2
F-2-19

2.2.6 Basic Operation (Saddle Stitcher Unit)

0009-2542
<Receiving Sheets>
The stitcher unit receives sheets from the finisher unit and outputs them inside the vertical path in vertical orientation.
The vertical path, while sheets are being output, is configured by two paper deflecting plates.
The position of the sheets being output is set by the paper positioning plate so that the center of the stack matches
the stapling/folding position.
Sheets coming later are output closer to the delivery slot, and the volume of paper that may be output is as follows:
15 sheets (maximum of 14 sheets of 80g/m2 + 1 sheet of 200g/m2)
2-16